Very likely, if the broadcast signal is still set to a lower power setting. Apple never changed the PC version of AirPort Utility, so if you have a PC.or a friend has a PC.you can install AirPort Utility 5.6.1 for Windows and get at the broadcast power settings that way.Īm using the wifi constantly in a room further from the base than was usual when I set it up, and don't know if I am kept from having a decent signal due to this old setting. If you changed the setting for broadcast power, the AirPort retained that setting. By default, the AirPort is set at the factory for 100% power, so unless you changed this setting, the AirPort is broadcasting at max power.ĪirPort Utility versions for the past 5-6 years do not have a setting to adjust the broadcast power. Post back the model number so we will know which product that you have.Īt an earlier time with this same Airport, the Utility software (or the firmware) supported setting a WiFi signal radius - a broadcast distance from the base station.Įarlier versions of AirPort Utility displayed a setting for broadcast power.100%, 75%, 50%, 25%. The model number starts with an "A" followed by 4 numbers. Please look on the bottom of the device for the model number, which is usually embedded in the foam pad base. Unfortunately, this does not tell us much about the product that you have. This is a small house and though on another floor, there are only 2 interior walls and nothing like pipes or tile between me and the base, linear distance only about 25 feet.Īnyone know if the signal distance setting might be an issue, and if so what I can do about it?ħ.8.1 is the firmware version installed on the AirPort Extreme. I am using the wifi constantly in a room further from the base than was usual when I set it up, and don't know if I am kept from having a decent signal due to this old setting. My concern is how I can know whether the restriction I had placed on the signal is still in effect, without my having access to it? I just tried to check that setting, and it is not in the current version of my Airport Utility. Could be an issue with my ISP or cable modem but I'm looking at all possibilities.Īt an earlier time with this same Airport, the Utility software (or the firmware) supported setting a WiFi signal radius - a broadcast distance from the base station. 7.8.1 and have had steadily worsening wifi/internet connectivity issues for 3 months, especially the last couple of weeks.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |